Dr David Langton, Director of ExplantLab
Scientists from leading biotech company ExplantLab in Newcastle (UK) have discovered a genetic link to explain why some patients develop pain and early failure of joint replacements.
In what is a world first, the research published by ExplantLab in leading biomedical research journal Nature Communications Medicine (24 June), could transform the way orthopaedic surgery is carried out globally.
The discovery follows over 14 years of research led by Dr David Langton, Director at ExplantLab, into joint failures and could herald a new surgical era where it would become routine for patients to undergo genetic testing, prior to receiving medical implants.
Currently, around 10% of the population of the United Kingdom will have a joint surgically replaced in their lifetime as a proven way to treat joint ailments such as arthritis.
However, as populations around the world grow older and heavier, this is leading to more joint replacements than ever, with some five million surgeries carried out globally each year - a number which is forecast to double over the next two decades.
Whilst the majority of patients are satisfied with the results of their surgery, a significant number of joint replacements fail early following adverse immune responses, leading to potentially dangerous and costly repeat surgery.
Recognising that longer lasting joint replacements are required, billions of pounds are being spent by medical implant manufacturers to improve joint implant design, the materials they are made from, and to optimise implant alignment using robotic technology.
One of the most popular implant materials used in the majority of joint replacements globally is cobalt chrome (CoCr). However, when small particles from CoCr joints are released into the blood, it can result in pain and joint failure in some people.
Dr Langton, a qualified surgeon with a PhD in immune responses to implants, explains: “A large percentage of joint failures are due to adverse immune responses, where small particles from the joint implant are released into the blood through wear and tear, stimulating an immune response in the body.
“Essentially, the immune system attacks the implant in a process similar to how a patient rejects an organ transplant. How quickly this “sensitisation” happens is variable and unpredictable, but it appears to be dependent on the type of material, the amount of wear debris released and other patient specific factors.”
The reasons why some patients reacted so differently to CoCr had proved elusive – until now.
Wanting to better understand this, Dr Langton began to research specific failed joints, the materials they were made from, and how they were being implanted.
Following 14 years of extensive international research, he and his team at ExplantLab, have established a “risk” genotype which places some patients at greater risk of developing CoCr metal sensitivity.
He continued: “Through our research we have been able to demonstrate that a significant percentage of patients carry a genotype that makes it more likely for them to have a reaction to a joint replacement made of a CoCr component(s).”
The ground-breaking study published in Nature Communications Medicine, represents a major step forward in understanding patient-specific responses to CoCr, which is used in around 70% of orthopaedic joints implanted throughout the world.
Taking the research one step further, ExplantLab, working with bioengineers, medical staff and patients at Newcastle University, University Hospital of North Tees and Hospital for Special Surgery, New York and Royal Perth Hospital, Australia, has developed a machine learning algorithm called Orthotype which uses a patient’s genotype to provide a risk pro that patient developing hypersensitivity to CoCr.
The patented software developed by ExplantLab uses an algorithm which was developed and validated from the results from 606 patients implanted with metal hip replacements and resurfacings, each of whom had been followed for a mean duration of ten years.
“Orthotype helps to identify patients and understand the risks prior to surgery, representing a significant advance in orthopaedic care for patients, and a step-change for orthopaedic surgeons, with potentially significant financial repercussions for global healthcare systems, through the avoidance of repeat surgery.”
Not only this, Dr Langton believes the algorithm will be invaluable in the investigation of patients who complain of joint pain after other obvious causes, such as infection, have been ruled out.
Orthotype can be used before or after joint replacement surgery. If used prior to surgery, it can help to guide surgeons in their selection of implant, based on the manufactured material most suited to the individual patient.
Post-operatively, it can be used in conjunction with the measurement of cobalt and chromium concentrations, to allow clinicians to accurately determine a clinical prognosis.
Concluding, Dr Langton said: “We are very grateful to the patients who gave their time, and our academic partners (Newcastle University, University Hospital of North Tees, Hospital for Special Surgery, New York and the Centre for Implant Technology and Retrieval Analysis in Perth, Australia, and Arthroplasty for Arthritis) who contributed their hard work and expertise to this research.”
Orthotype has since been registered with the MHRA for use in the United Kingdom.
ExplantLab accessed the same technological and statistical expertise for the study which saw them produce award-winning research into COVID-19.
Working with Newcastle University as well as Northumbria Healthcare, Newcastle Hospitals Trust and University of Oslo, ExplantLab was also the first to describe a gene which confers protection against severe complications of COVID: HLA-DRB1*04:01.
Dr Langton added: “Interestingly, the frequency of this particular gene strongly correlated with a population’s latitude, potentially providing some understanding of the global variation in the impact of the disease.”
The paper was given an award at the recent European Federation of Immunogenetics and Histocompatibility Annual Meeting.
Reference: Langton, D.J., Bhalekar, R.M., Joyce, T.J. et al. The influence of HLA genotype on the development of metal hypersensitivity following joint replacement. Commun Med 2, 73 (2022).
For more information or to arrange an interview, contact:
Hannah McGivern
T: 07882404283
E: hannah@hancommunications.com
About ExplantLab
ExplantLab is a leading an orthogenomic biotech company providing patient specific tests to help eliminate the failure of orthopaedic implants.
Established in 2011 by Dr. David Langton, ExplantLab has become the largest independent joint retrieval unit in Europe.
This has enabled the company to analyse explanted joints for over 14 years, the research and knowledge from which they have developed Orthotype – a patented, first in class genetic test that predicts the risk of implant failure in specific patients.
The company’s objective is to improve the performance of medical implants by providing the tools necessary for healthcare professionals to enhance the lives of their patients.
With over 40 published scientific papers, ExplantLab is recognised as experts in their field, and hold no contracts with manufacturers of medical devices, ensuring that they remain totally independent and impartial - something which is unparalleled in the United Kingdom.
Website: explantlab.com
Twitter: @ExplantLab
About Orthotype
Orthotype is a machine learning algorithm developed and validated from the results from 606 patients implanted with metal on metal hip replacements and resurfacings, each of whom had been followed for a mean duration of ten years.
It can be used before or after joint replacement surgery.
Preoperatively, patient DNA is extracted from a cheek swab or blood sample. The DNA is then sequenced and the patient’s HLA genotype is determined.
The genotype information is inputted into the Orthotype algorithm and a risk factor - relative to the background population – is outputted. This information can help guide the surgeon in terms of selecting an implant manufactured material most suited to the individual patient.
Post operatively, for patients who already have been implanted with a CoCr joint, genotyping is used in conjunction with measurement of the patient’s cobalt and chromium blood concentrations.
The measurement of cobalt and chromium concentrations allows a clinician to accurately determine the wear rate of the implant; genotyping establishes the immune characteristics of the patient; the algorithm ties these key parameters together to produce a validated clinical prognosis.
